Highland Traveller - Scottish Touch

Mail Order Highland Dress and Kilt Hire

Tel. 01324 717765 - Fax. 01324 719942

www.highlanddress-hire.co.uk

 

 

NOTE: When measuring the following basic rules should be followed.

Disregarding these rules may lead to a badly fitting outfit.

 

 

1.      You must use a proper tape measure.

2.      Do not attempt to measure yourself, have someone do it for you.

3.      Do not try and read the tape measure as you are being measured.

4.      Stand up straight and natural. Do not slouch or tense your muscles.

 

Measurement Guide

 

Size A - Collar. If you don't already know your collar size then place the measuring tape around your neck at the point where your shirt collar would sit. This size should be very loose giving yourself plenty of room to move. This size should be around 2 inches larger than your actual neck size.

 

Size B - Chest Size. Hold your arms out about 2 feet from your body, then place the tape measure around your body, just below your armpits. This size should be loose, now add 1.5 inches to your size, this will be your jacket size.

 

Size C - Arm Length. You can either measure the outside arm length on a good fitting jacket that you may have or run your tape from the top of your arm down to your wrist bone.

 

Size D - Kilt Waist. This size should be taken over your shirt. Wrap the tape around your body at the point just above your navel, pull the tape very tight then slacken it back until it feels comfortable but very firm. The larger the gent the more the tape will sink into the body, this is normal for if this size is not tight enough the Kilt will start to slip down when moving around.

 

Size E - Kilt Drop. At the same point as the Kilt waist (size D - just above the navel) measure down to between top of the kneecap and the mid kneecap, this size will be the length of the Kilt.  It is very important that you measure straight down (as photo) and not across the body at an angle.

 

Size F - Shoe Size. Simply the size of shoe you require.

 

Size G - Inside Leg.  This is your inside leg measurements for your tartan Trews. This size is optional, Trews can be received un-hemmed and tacked to length by yourself once you try them on.

 

Size H - Your Height. This is important; it will help us to determine if your Kilt length measurement is accurate.

 

 

 

www.highlanddress-hire.co.uk